#31
|
|||
|
|||
looking for an oil pump
Where can I find an oil pump?
I have finally gotten to the point that I am going to pull the motor and replace the gasket, and as long as I have it out I am going to replace the oil pump, if possible. I also will need an oil pan gasket, which I have not been able to source. Any suggestions on that? |
#32
|
|||
|
|||
Quote:
__________________
Mike Rausch Newark/Bear, DE Selling NEW and USED Volvo parts! www.swedishbrickyard.com Email: mike@swedishbrickyard.com |
#33
|
|||
|
|||
The oil pan can stay in place i'm 99% sure
but you have to remove the crankshaft, bolt so the timing belt. That's true it's very strong part. measure the wear you can port it if it's off the engine it will help a bit your efficiency.
__________________
[SIGPIC][/SIGPIC] |
#34
|
|||
|
|||
You will have to pull the pan as the pickup tube for the oil is bolted to the pump, can't get to those bolts without pulling the pan Pull the engine and do as V8volvo suggested and Paint the block while your at it
__________________
12mm pump heads, ARP stud kits and GTD nozzles available! http://d24t.com/showthread.php?t=1646 NA intake manifolds and 240 turbo pans for sale. Need d24 or d24t parts? PM me! Shipments done on fridays! 1982 242 D24+T/M46- Super pumped! Build thread: http://www.d24t.com/showthread.php?t=1545 1984 764 D24T/ZF build thread: http://www.d24t.com/showthread.php?t=1734 Diesel parts cars: 82 244,83 244, 84 244, 84 245, 85 745 |
#35
|
|||
|
|||
Pan gaskets are still pretty easy to find. Any IMC reseller has them (i.e. gowestyautoparts.com). Or you can do as VW now does and use a high quality sealant. Grey Reinzosil is the only thing that I would use. Very thin bead is all that is necessary.
Good luck, you will be glad when you get this one fixed... I know it has been giving you a hard time for quite a while now!
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#36
|
|||
|
|||
Pan gaskets are still pretty easy to find. Any IMC reseller has them (i.e. gowestyautoparts.com). Or you can do as VW now does and use a high quality sealant. Grey Reinzosil is the only thing that I would use. Very thin bead is all that is necessary.
Good luck, you will be glad when you get this one fixed... I know it has been giving you a hard time for quite a while now!
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
|
|