#1
|
|||
|
|||
d24 engine bolt pattern
ive been thinking about finding one of these engines and throw it into a toyota 4x4 truck. i cant find any info on the bolt pattern. is it the same pattern as the 1.6L vw diesel?
|
#2
|
|||
|
|||
No it is not. The D24 bolt pattern is the same as used on other Audi /VAG engines that have 5, 6 cylinders but the 4 cylinder hole pattern is different.
There are people who have put 5 cyl D20 engines into Vanagons and there is a company that makes adaptors Kennedy Engineering I believe. Steve |
#3
|
|||
|
|||
Use a 1,9 td. it has also the starter on the right side
|
#4
|
||||
|
||||
Post that kinda crap on the TDI forum! This is supposed to be a forum thats FOR keeping D24 powered anything going!! Not swapping in something else instead Jason
__________________
Back again with a '84 760 GLE D24T/ZF SOLD but not forgotten! 1984 760 Sedan, built D24Tic/ T-5 swapped My engine build: http://www.d24t.com/showthread.php?t...t=engine+build T-5 swap: http://d24t.com/showthread.php?399-W...to-quot-w-pics! |
#5
|
|||
|
|||
Quote:
And a 1,9 td is the same engine as the d24 just but 2 cylinders less. |
#6
|
|||
|
|||
I know that the 850 engine has the Audi/VW 5cyl bolt pattern. Anyone ever think about putting a d24 in one of these? There are several standalone trans controllers that would work.
|
#7
|
|||
|
|||
Hello, so the d24 is the same bolt pattern as a 5 cyl audi? Thus I could bolt it to my 90quattro? . Ad24 with awd in my future? What about the starter? I have a neighbor with a couple d24's engines only as the 740 shells were in new england and have been sitting in a field for around 10 years!!!
|
#8
|
|||
|
|||
I think a D24 in an Audi would have the timing belt sticking out through the front bumper. In a 5cyl Audi the motor is already so far forward that there is no room in front of it for the rad, the rad goes next to it... the timing belt cover is right up against the core support. I think adding another cylinder would mean major surgery...
If you are looking for crazy ideas, you could technically probably get a D24T to bolt into a Porsche 924 as well...
__________________
86 745 D24T/ZF 345k lifted 2.5" 83 764 D24T/M46 155k |
#9
|
|||
|
|||
My question is if it will bolt up/ starter. Etc. I kmow the extra cyl would make it stick out far, I would weld up a new cross member out of some heavy gauge steel and move the bumper forward. It will probably look funky, but I don't really care that much! A porsche 924/944 would be fun but I wnt awd in NH and I have an extra audi shell already there so.....
|
|
|