Go Back   D24T.com > Technical Discussion Area > Help! My car died!

Thread Tools Display Modes
Old 06-06-2019, 03:16 PM
DieselScout DieselScout is offline
Senior Member
Join Date: Aug 2014
Location: Upstate, NY
Vehicle: 1982 245-GL D6, 1982 244-GL D6
Posts: 148

I was able to move the IP sprocket by taping on it lightly with a hammer and die. The IP sprocket did move when I applied tension to the belt.
Reply With Quote
Old 06-06-2019, 11:57 PM
ngoma ngoma is offline
Supporting Member
Join Date: Nov 2009
Posts: 1,239

Good. We should still try to see if the IP internals can rotate thru at least a few cycles. Can you walk the belt off? And then try rotate the IP shaft via a wrench on the sprocket pulley nut? I wouldn't use a hammer and punch to try to move it further, seems like too much of a shock.
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote

d24t, died, diesel

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -8. The time now is 01:16 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2023, vBulletin Solutions, Inc.