D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain

Reply
 
Thread Tools Display Modes
  #1  
Old 07-18-2016, 04:18 AM
genegr genegr is offline
Supporting Member
 
Join Date: Feb 2016
Location: Chippewa Falls, WI
Vehicle: 84 760 Turbo 85 740 Turbo
Posts: 37
Default Intake gunk

As I dismantle my back up motor, 85 with 153K mile. The intake was very clean at one and two but three thru six were really clogged. Any ideas? Exhaust valves leaking? Seems like an easy maintenance item to clean and change every couple of years.

Thanks
Reply With Quote
  #2  
Old 07-19-2016, 01:19 PM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

Engines with EGR (1985+ US D24T and some 1984) tend to build up intake sludge due to the soot in the recirculated exhaust mixing with oil from CCV gases. The EGR valve is on the turbo charge pipe which enters the intake manifold between cyls 2 and 3, so airflow to the rear cylinders may determine why yours showed the most plugging there. However, I have seen them with a significant amount of buildup in the front end as well. Often on the EGR motors you can pull off the turbo blowoff valve from the front of the intake and find it completely packed in.

It's not a serious problem, as you pointed out, but preventing the buildup is as simple as disabling EGR by removing the vacuum line from the EGR valve. If you want to really cover yourself you can make a blockoff plate as well. The EGR control system on these old mechanical engines is primitive and works in a crude way even when everything is brand new and operating to spec -- it relies on various temperature-actuated vacuum switches, throttle switches, modulators, etc and depending on what kind of shape that is all in, just as likely as not that by this point it's running EGR when it shouldn't and vice versa. You're better off with out it, unless you want to spend the time to fully check it all over and ensure it works as designed and then deal with cleaning the intake every so often.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #3  
Old 07-20-2016, 07:20 AM
genegr genegr is offline
Supporting Member
 
Join Date: Feb 2016
Location: Chippewa Falls, WI
Vehicle: 84 760 Turbo 85 740 Turbo
Posts: 37
Default

Thanks for the detailed explanation. As soon as I can find an intake gasket I'll pull my 84 and see how it looks. I lot simpler motor to work on than the 85.

thanks again
Reply With Quote
  #4  
Old 07-20-2016, 08:04 AM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

If your '84 motor doesn't have EGR then it will be completely clean inside. You can check it quickly by just pulling the pressure relief valve off the front of the manifold, you don't have to remove the whole thing. You can see into it from there, but again, without EGR, unless something unusual is happening there will be nothing to see.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #5  
Old 07-20-2016, 10:01 AM
genegr genegr is offline
Supporting Member
 
Join Date: Feb 2016
Location: Chippewa Falls, WI
Vehicle: 84 760 Turbo 85 740 Turbo
Posts: 37
Default

Great I will check it this weekend.

thanks
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 05:27 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.