D24T.com  

Go Back   D24T.com > Technical Discussion Area > Performance and aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 12-06-2022, 12:06 PM
DieselScout DieselScout is offline
Senior Member
 
Join Date: Aug 2014
Location: Upstate, NY
Vehicle: 1982 245-GL D6, 1982 244-GL D6
Posts: 163
Default HD Clutch - D24 M46

RE: Part number, K70029-03

I was searching clutch kits for the D24 M46 and found "HD Clutches."

Realistically, do these last any longer or feel any better while in use for a daily driver diesel?

HD 1: https://www.summitracing.com/parts/sbb-k70029-03-hd
(https://www.southbendclutch.com/clut...9-03-HD-12747/)
HD Stage 2: https://www.summitracing.com/parts/sbb-s1343
Regular Sachs: https://www.summitracing.com/parts/sxr-k70029-03
Reply With Quote
  #2  
Old 12-06-2022, 07:28 PM
v8volvo v8volvo is offline
Supporting Member
 
Join Date: Jun 2009
Location: Montana, USA
Vehicle: '86 745, '83 764
Posts: 1,618
Default

I am amazed to see that anyone is making an aftermarket HD clutch for a diesel Volvo, but it appears that those first two that you linked are indeed meant for a D24 or D24T. I'm judging by the pilot bearing mainly -- those show the correct type needle roller pilot bearing used in the D24 family engines.

Beware the third (stock Sachs) kit though. It may be for a gasser. Again I'm judging by the pilot brg in the photo. Notice how it is much different, a ball-type roller bearing for the gas redblock engine's crankshaft. Some Sachs diesel kits for years have been correct for the diesel application yet come with the wrong gasser-style pilot, so that doesn't necessarily mean the rest of the kit is wrong. But it calls it into question so check part numbers carefully.

With reasonable driving many folks have seen 300,000, 400,000 miles out of stock style Volvo clutches including in diesels, so I wouldn't worry about longevity on the stock clutch in a D24 or stock or even moderately turned up D24T. Power capacity would be the question really that would make you look towards the HD options, IMO. But there can be big, big tradeoffs with higher-capacity clutches in terms of daily driver user-friendliness. Heavier pedal effort, more grabby engagement, sometimes chatter or gear rattle, etc. In other words, with a heavier spec clutch, you are usually *sacrificing* feel and ease of use in exchange for greater capability. Unless you need the extra torque capacity to back up a heavily modified engine IMO the stock setup is usually preferable.
__________________
86 745 D24T/ZF 345k lifted 2.5"
83 764 D24T/M46 155k
Reply With Quote
  #3  
Old 12-07-2022, 03:31 PM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default

Main reason for long clutch life with the M46 transmissions is the stump-puller granny gear ultra-low first gear. Totally undemanding of the clutch.
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote
Reply

Tags
clutch, sachs, south bend, transmission

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 09:56 PM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.