[ngoma]

The bare minimum is all, EXCEPT for the IP pulley locking pin!

Special tools for IP Timing
5201 Dogleg wrench for pulley bolts. If there is space (not in 240), can get by with common 17mm offset box end wrench, but won't be able to get torque reading.

5199 Pulley wrench. Need, but can make a reasonable facsimile.

5194 Dial indicator holder/extension. Need, these are currently found on ebay.

Dial indicator. Need


Special tools for TB R/R, camshaft timing
ALL the above, plus:
5187 Crank damper holder (counterhold). Need. Forum members have made before, search threads for details. There are also recent threads about a currently available version from the EU.

5188 Crank pulley center bolt wrench. Need. Forum members have made before, search threads for details.

(See link in post #16 in this thread for illustration of the above two special tools)

5190 Camshaft alignment bracket. Need. Supposedly can make one out of a brass door hinge.