Thanks for helping!!! Thanks to your advice, it is easier for me to endure the war. You give advice. I check them. It takes away from the war.
v8volvo - this applies to you too.
Quote:
Originally Posted by Jason
Have you done a leak down test?
|
Yes. I did a test. The difference between the cylinders is 0.5 kgf / cm2
IMG_20220616_182709.jpgIMG_20220616_182735.jpg (Instrument readings are not correct)
Quote:
Another possible way to help with diagnosis would be to pull the injectors and inspect the tips of the nozzles
|
That's the difficulty, that soot on nozzles and washers is the same. Even after a long trip.
Quote:
If you still can't narrow it down to a particular cylinder via injector inspection or a leak down test, I would suspect the pump and try swapping with another one.
|
It may be necessary to do so
I have a question:
what if the engine has a different degree of compression in the cylinders? If anyone cylinder protrudes from the block less than the others. A leak test won't show this.
Can I try to reduce the thickness of the washers under the injectors?