If your looking at a super charger you should be able to run an eaton m45 from a Merc with the pulley off of a M45 from a mini for a max boost of 10.2psi excluding valve overlap calculations. (then bleed/bypass to control boost vs RPM). Pulley ratio would be about 2.67 to 1
a crack pully from a VW t4 should be direct fit, then an alternator from a T4 with an over run pully (machine the back of the pulley to make it fit). You would need to find something to then run the power steering.
That's as far as i have got with it anyhow.
Dan
|