View Single Post
  #10  
Old 09-04-2020, 10:49 AM
ngoma ngoma is offline
Supporting Member
 
Join Date: Nov 2009
Posts: 1,351
Default

Quote:
Originally Posted by DieselScout View Post
How can I tell if my Timing is 180 degrees off?
Crankshaft rotates 2x for each camshaft revolution, IP is connected 1:1 to camshaft so it is possible to time IP 180deg out relative to camshaft.

As RedArrow shared above, verify crankshaft at TDC, with camshaft #1 lobes pointing up & out, notch on IP cog pulley should roughly align w/ mark on IP triangular mounting flange.
__________________
1985 744 gle d24t
1985 745 gle d24t
Reply With Quote