Quote:
Originally Posted by BogfordGarage
Take a priming bulb attach it directly to the pump inlet and create a vaccum with it, after doing this a hissing noise could be heard and it was traced to the seal. Pressurising the pump didn't reveal anything so it was air getting in rather than fuel getting out that was the problem. I hope this helps.
|
Great tip, thank you. I will try this on Saturday and see if I get anywhere. I have the feeling I have a similar problem since I cannot see any fuel leaking. My main suspect at the moment is the transparent hose itself, since I already replaced everything else (except the IP seal of course) without success.