D24T.com  

Go Back   D24T.com > Technical Discussion Area > Diesel Engine and Drivetrain
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-26-2013, 08:50 PM
RedArrow RedArrow is offline
Senior Member
 
Join Date: Jan 2013
Location: New York
Vehicle: 1986 Volvo 745 TD
Posts: 902
Default PS fluid and new bushings, seals

Thanks for all your info! I inspected the PS pump and noticed that the lower bushings are in bad shape, cracked and softened, deeply carved in. Especially the front one. That`s probably the reason that the belt is not aligned perfectly. The pump `went downwards` a little, tilting the assembly a bit, putting some extra pressure also on the upper bushing that came out of the hole towards the front of car 3-4mm. The front seal of the pump does leak in the middle area so I will have to get to Autozone asap and get the parts you suggested and do the rebuild. For now as an SOS solution I used the `turkey fluid extractor` and took old fluid out, replaced it with the proper atf. System does not have air in it, no bubbles visible but my steering is not Volvo-like so that tells me what`s going on. Drops on the ground, nothing major but I want this fixed and focus on other treats for the car. Oh btw I did fix the ignition switch as well, well that`s a long story but now it is back and working.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 02:32 AM.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.