Quote:
Originally Posted by ngoma
Not so sure about the Monarks being bigger, but more about being the "GTD" design, and of better quality than currently available replacement Bosch nozzles that are made in China or India.
Size of the current IP or nozzles is not the limiting factor.
What do you mean by higher pop pressure? Higher end of spec range or higher than spec? Benefits/drawbacks?
|
Ah right, my injectors should he fine for now then. Previous owner has em down in the service history as being checked e.t.c. Recently
Not sure if higher than spec but deffinetly at the higher end if not slightly above for more efficient combustion with heavy fueling I think... I'm trying to read up/learn as much as possible about tuning this engine before getting too deep ha
Saw some injector stuff here -
http://d24t.com/showthread.php?t=292