Here's a couple pics of the head. Just finnished the port and polish job tonight. Didn't get real crazy with it, just smoothed out the casting lines in the ports, and mostly cleaned up the material under the valve seats. All the ports had a sharp edge from the seat pocket being cut. The exhausts were worse than the intakes interestingly. I removed the ridge around those areas and blended from the seat into the port. Kinda hard to see in the pics, the camera flash really doesn't get down into the port very well. As you can see in the last pic, the head is all cleaned up, and now ready for the new guides to be installed. Its getting all new guides, and a 3 angle valve job next! As Alex likes to say, its my thousand dollar racing head...lol
The exhaust port in the one pic looks all out of shape... its how the light is hitting it, I was trying to get close to the intake port as you can see down it the best with the camera flash. I took at least 10 pics and they all sucked.