crossmenbers are the same on the 200 serie cars as far i know.
the difference is in the engine mounts wich are different on the diesel and gas 200 models.
the 760 diesel mounts will be useless for your 242.
you need 200 series diesel mounts and silent bloc.
the drive shaft lenght is different following your gearbox combo m46 gearbox DF are shorter because of the OD.
diesel radiators are bigger than gas ones on the 200 serie.
Those engines do not overheat at all stock that's BULLSHIT.
only neglected engines do not work properly.
Change the timing belt, water pump, timing belt pulley (idler pulley) .
follow the torque specs
you need special tools to do it with accuracy
the same for setting the pump.
use synthetic oil if possible and let it warm up like any engine.
if it do not run ?
what do you mean ?
if glowplugs work ,pump adjusted correcly , not seized injectors and valve clearance (you should have hydraulic lifters on a turbo) you have no reason to have it not running.
if you have questions...ask
__________________
[SIGPIC][/SIGPIC]
|