Quote:
Originally Posted by RedArrow
Thanks TGreasel for the advice. That suggested play is about 2.5millimeters then... I`ll double check but I guess I did it about right. It`s crazy that it was so loose I could turn them easily with a finger (why? ) One `leg` of safety pin was broken too. No discoloration visible and they seem to be in ok shape but I`ll order 2 new sets, compare them and replace anyways. I don`t remember any washers between the bearing and the nut. Brickboard is a great info source btw. Thank you
|
I think that is a decimal place off.
This is really general, but they know a thing or two about bearings...
http://www2.vsm.skf.com/~/media/File...640_44_47.ashx
and vid
http://www.youtube.com/watch?v=0RqlrnoiqnY
If you get them packed and adjusted, and they run free and quiet, they are fine.
Maybe the Volvo nut is so beef they didn't bother with a washer, been a long time singe I had to look at mine.