You need to keep normal feed really minimum, so at idle-speed
will keep somewhere between 1000-1500rpm. Trick is to mod that
plug on richer-circuit (that thing in top of the td pump, cant remember if it
was called "ICD" or something like that) so radical at when pressure kicks in
the real feeding begins. And the governor plate on that richer mod (the plate which you can roll up and down, and have an effect when the plug starts to pull down due to pressure) needs to be rolled as down as it goes.
Then they speak something about turning the gas-axle.
Thats all i found. Sad i cant help more at this moment.
|