Beppe D24t Brekizer
Goodday,
Thought I'll show some pics of my 740. https://volvo700vereniging.nl/sites/...s/IMG_1150.JPG https://volvo700vereniging.nl/sites/...s/IMG_1080.JPG https://volvo700vereniging.nl/sites/...s/IMG_1172.JPG https://volvo700vereniging.nl/sites/...728_184510.jpg https://volvo700vereniging.nl/sites/...731_112640.jpg https://volvo700vereniging.nl/sites/...730_020343.jpg I call her Beppe because its an old car who always tries to take care of me, Beppe means Grandma in Frisian. The engine made more than a million Km's (from my old 740) rest of the car 700.000km's Engine : D24t Intake : N/A of VW LT Turbo : stock turbo @ 1.7 bar Gearbox : Placed a M90 because of this : https://www.youtube.com/watch?v=CVeCq95r5kI Fuel pump : Screwed up like a morron. Air filter : Stock airbox with Pipercross air filter element. Intercooler : Ebay intercooler with china piping |
Nice to see another D24T equipped vehicle :) Feel free to add some more pictures of the enginebay ;)
/Dennis |
Quote:
Later I'm going to powdercoat my valve cover, distribution cover and intake, don't know what colour yet :rolleyes: |
Nooooooooo!
Well, I've fucked up.
I found out that my slave cylinder was leaking, that's why I couldn't bleed it. So just remove it, place my backup cylinder and everythings fine hé? No, I couldn't remove my old slave cylinder, I've never seen anything so stuck :eek: I used loosening oil, I've tried to turn it with a big set of pliers and eventually I've tried to tap it with a small hammer.. I didn't use heat because everything is a bit oily on the underside of my car, we've had a fire before.. don't want it again. The result : https://myalbum.com/photo/faJpyvpYQOep/360.jpg ARRGHHG :mad::rolleyes: Even when the part is broken off, I still can't remove it.. not even in the vice and with a bigger hammer.. it won't budge. So yeah, now I need to create something that will hold the new slave cylinder.. |
Small update :
Found a piece a metal and I'm fabricating a slave cylinder holder out of it https://volvo700vereniging.nl/sites/...gshalder_0.jpg |
Any progress on the slave-cylinder-situation? I hope you sort it out :)
|
She's up and running again!
Testing if de plate fits : https://volvo700vereniging.nl/sites/...s/hYeDNcTx.jpg Milled a hole in it for the slave cylinder -edges still rough from grinder but sanded it afterwards- https://volvo700vereniging.nl/sites/...s/QZNgegPn.jpg https://volvo700vereniging.nl/sites/...s/xFoVp2vI.jpg Painted, fitted and up and running! https://volvo700vereniging.nl/sites/...s/AY4sxRgT.jpg They aren't the best pics but at least you can see what's what :) Now I need to work out the intercooler, especially what kind of intercooler would be best.. Anyone got a part number of the Iveco intercooler? |
my new intercooler :
https://myalbum.com/photo/6aZYkQN4EwN6/1k0.jpg |
Update time!
I've fitted my intercooler :)
https://myalbum.com/photo/w7SOYTuSMtDn/540.jpg https://myalbum.com/photo/1OQQtNxpbKjP/540.jpg I don't really notice allot of difference, or even a difference.. :confused: She pulls just as strong as always? https://myalbum.com/photo/xQzezMeur5H7/540.jpg :p And for the fun of it, I've cleaned her up a little bit. https://myalbum.com/photo/zYpGjir4I0r4/540.jpg @ Dennis, pics of a clean engine bay are coming later, didn't had time to do so :p |
Benchrun!
Had my car on the rolling road today,
https://myalbum.com/photo/zn8awiAWD6YO/540.jpg not disappointed : https://myalbum.com/photo/82bG8L8w8w9Z/540.jpg But not enough. I need to fit my GTD nozzles, and I want a 12mm pump heads, but where to find it? |
All times are GMT -8. The time now is 02:40 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.