D24 Special Tools
5 Attachment(s)
Here are some photos and brief descriptions of D24 Special Tools.
For working on IP, IP belt, IP timing, Cogged cam pulley, Injector lines: Attachment 404 From top to bottom: Dogleg 17mm offset wrench w/ 1/2" socket for torque wrench. Easier wrenching of rear cam pulley and IP pulley nuts. Volvo tool P/N reads 9995201 Attachment 405 Cam pulley holder. Holds cam pulley stationary while tightening/loosening nut. Also rotates pulley on camshaft to adjust IP timing. Attachment 406 Closeup of P/N 9995199 21 AF-1134 Attachment 407 Injector line wrench. Should be able to reach all of them with this wrench! Hazet tool P/N 4560 Attachment 408 |
2 Attachment(s)
|
Not specifically a Volvo special tool, but very useful, when necessary. For removing the IP shaft seal (and possibly other similar seals).
Lisle Shaft Type Seal Puller 58430 http://www.lislecorp.com/uploads/pro...274B4B65EC.jpg |
Are any special tools used for the 1.6 liter VW engines the same as those used for the D24? I found this kit http://www.partsplaceinc.com/product...aspx?sku=17821
|
1 Attachment(s)
Timing tools are the same.
Hazet 2574-1 back scratcher & tappet depressor. My only one where the self made version truly sucked. Droid autocorrect really really thought I wanted to call it 'hazel' |
Anybody have the part number or link to the crankshaft holder, or what tools specifically interchange between the VW 1.6 and the D24?
|
Tools
This blog listed a few of the d24 tools, including Volvo part numbers.
http://www.upshiftblog.net/2012/02/i...ming-belt.html Scroll down to see there is the `Greenbook` ready to download, in 3 parts (if needed). (`Service Manual Repairs and maintenance, D20, D24`) Lots of `tool-talk` here too: http://volvoturbodiesel.blogspot.com/ with pics & part #s. |
Thanks for the links. I found the first one very useful in cross referencing part numbers and was able to find some of the tools through tasca.
|
I can get the tools for the same or possibly cheaper than Tasca...
|
hi Mike
re I can get the tools for the same or possibly cheaper than Tasca..
hi again Mike do you know where to get, or can get tool 5201? that is the final tool I need for my belt change on D24 thanks and regards JM |
All times are GMT -8. The time now is 02:22 PM. |
Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2024, vBulletin Solutions, Inc.